How to reset the asic password?

1.Reset button Important: The method only works if the miner is turned on within 2-10 minutes after startup. If more than 10 minutes have passed, resetting is usually not possible Press the Reset Button on the Antminer for Resetting First, switch on the Antminer module. You need to wait for at least 2 minutes after switching on. Now, press and hold the hardware reset button on the miner for 10 seconds. Now, the miner will go into the resetting mode, and it will power on automatically after 4 minutes. After resetting, you will have to scan the IP address of the Antminer again. The default login and pass: root/root 2 Reset + IP report (Hard reset) You can also use the IP Report button that can be seen behind the Antminer module for resetting the mining system. You need to switch off the miner first. After that, press and hold the hardware reset + IP report button on the miner for 10 seconds. Now, you have put back the factory settings into the Antminer.