Vnish Firmware Self-installation

release 1.2.6-rc2

📢 New Features:
- Added support sub-model A3HB70501 for Antminer S21 XP

🐞 Bug Fixes:
- Fixed apply without restart overclocking settings, preset change, etc.
- Fixed Antminer S19i operation
- Fixed setting of voltages during autotune out of power supply range
- Fixed autotune on Antminer S19e XP Hydro
- Fixed an issue with applying the Chinese lang

release 1.2.6-rc1

⚙️ New Features:
- Patented Chip Throttling now included Hashrate compensation utilizing cooler chips to keep high performance!
- Added Chinese language support
- NEW: Consumption graph added for detailed monitoring
- Markings added on chips with frequency adjustments due to throttling (x21 series)
- Support added for Antminer S21 XP Hydro, S21 XP Immersion and T21 with Xilinx ctrl
- Ignore Fan Speed autoswitcher option now can be ignored in auto mode when raising presets
- Add ignore broken chains on PIC/NOPIC miners

✨ Improvements:
- Default voltage decreased for Antminer S19 XP
- Corrected presets for Antminer S19e XP Hydro, S19(76 chips) with Xilinx ctrl
- Updated presets for Antminer L7 and S19i models
- Fixed occasional EEPROM corruption issue
- Fixed immersion mode reset to auto
- Accelerated reading of EEPROM's on all control boards except XIL
- Improved performance of autoswitcher and autotune features
- Enhanced miner stability
- Various UI/UX fixes

🐞 Bug Fixes:
- Resolved issue preventing firmware start after CV update
- Fixed display of active pools in the old API (4028)
- Fixed programmatic disconnection of boards
- Adjusted cooldown timing in Hydro and Immersion modes to prevent extended cooling periods (2min)
- Fixed voltage return issue during adjustment
- Fixed chain break detected on Antminer S19 with Xilinx ctrl
- Fixed voltages setting on Xilinx ctrl
- Corrected sensor reading errors on Antminer S21 Pro and Xilinx ctrl models

💻 API Changes:
- Added ‘hr_nominal’ to the ‘summary’ field for miner theoretical hashrate
- New fields ‘build_uuid’ and ‘build_name’ added to ‘info’ requests
- New field ‘power_consumption’ added to ‘metrics’ requests
- New field ‘throttled’ added to'chips' requests

release 1.2.6-alpha5

New Features:

• Chip Throttling: Now available for the x21 series (excluding S21 Pro).
• Expanded Miner Support:
• Antminer T19 Pro Hydro
• Antminer S21 XP
• Antminer S19j XP
• Antminer S19e XP Hydro
• New Settings:
• Preset switcher: Ignore fan speed and Auto lowering top preset options Added.
• PSU Update:Added PSU model name for 0x64.
• Pool Updates: Default pools updated for Antminer L7.

Improvements:

• Autotune Efficiency: Autotune algorithm is now more effective.
• Deprecated Features:
• Removed Hotel Pool.
• Removed the "Fees" tab.
• Restart Configs: The max_restarts field now defaults to disabled (set to 0).
• Additional Presets: New presets available for Antminer S19j Pro+ and Antminer S21.

Bug Fixes:

• Antminer S21 Pro Sensor: Fixed sensor reading issues for S21 Pro.
• Immersion Mode: Fixed prolonged cooling periods in immersion mode.
• Voltage Configs: Corrected default voltage settings for Antminer S19-88 and S19-126.

API Changes:

• API Response: Now only includes active chains. Disabled/disconnected chains will be excluded from the API response.

release 1.2.6-alpha4

New Additions:

• Added support for Antminer S21 Imm and Antminer S21 Pro
• Added 'board_model' and for miners that don't have information in EEPROM's we set an identifying variable

Fixed:

• Fixed crashing if there are no user pools on the miner
• Fixed disabling chain if preset is selected
• Fixed an issue where a miner could get stuck in a loop reconnecting to a pool or improperly configured proxy.

API Changes:

• Added 'psu_model' and 'psu_serial' to request factory-info

release 1.2.6-alpha3

New Additions:

• Added support for submodel (BHB68603-) of Antminer S21
• Added lower preset for Antminer S19a and Antminer S19XP
• Added the ability to edit tuned presets

Changes:

• Logs are not saved after reboot on Cvitek
• Changed the name of the diagnostic reports and fixed double archiving
• Increased the maximum speed of fan coolers to 90% for preset raising. Now if the speed is less than 90%, the preset will raise it
• Improved handling of pools
• Enhanced miner stability
• Fixed dashboard layout
• UI/UX changes

Fixed:

• Fixed the pause when switching presets
• Fixed parse EEprom's for Antminer L7
• Fixed AML sd update

release 1.2.6-alpha2

New Additions:

• Added submodel support for Antminer T21(BHB68701-)
• Added support for submodels BHB68606 and BHB68603P of Antminer S21
• Dump EEPROM's in case of decoding error

Changes:

• Changed flag `Resume mining after reboot` now in order to restore mining this item must be enabled Implemented quick pause of the miner during initialization
• Updated miner diagreport
• Improved work with pools
• Made UI/UX fixes
• Minimum speed of coolers during pause reduced to 0% (for known models that can stop at 0 - Nidec)
• Changed RISE to 85°C and DECREASE temp to 90°C

Fixed:

• Resolved issue with displaying stock information by chains
• Fixed error of setting frequencies at low ambient temperature
• Fixed preset change during decrease to working voltages

API Changes:

• Added 'has_pics' field in factory-info

release 1.2.5

New Additions:

• Added support for Antminer S21 (Amlogic), Antminer S21 Hydro, Antminer T21 (Amlogic/Cvitek), Antminer T19 Hydro, Antminer T21(BHB68703), Antminer S19k Pro (Xilinx), Antminer S19k Pro (BHB56903/BHB56903-/BHB56902-)
• Added widget Performance
• Introduced new presets: preset 9250MH for Antminer L7, lower presets for Antminer S19, and new presets for Antminer S19 Hydro, S19Pro Hydro, and S19Pro+ Hydro
• The dashboard now displays Hashboard factory information and Hashboard temperature after overheating
• Added features for preheating chips and voltage adjustment in automatic cooling mode
• Logs are now saved after reboot
• Invalid CRC EEPROMs are ignored

Changes:

• Now supports the previous format of autotune.json without serial number (1.2.0/1.2.1)
• Reduced the minimum difference between switching temperatures to 5 degrees Celsius
• Recalibrated chip temperature for x21 series
• Updated water temperature checks on Hydro miners
• Adjusted chip temp offset for Hydro miners
• Enhanced autotuning functionality
• Corrected profiles for Antminer S19i and S19 Hydro
• Raised the critical temperature threshold to 120°C
• LEDs now blink faster when activating find miner
• Made minor UI/UX adjustments
• Enhanced miner stability

Fixed:

• Fix for minimum hashrate check when quick start is enabled
• Fix cooling down for fan auto/manual mode
• Resolved false virus detection on Cvitek firmware
• Fixed double compression (diagreport/backup)
• Corrected /docs route
• Fixed memory leaks and firmware hangs on Cvitek
• Resolved configuration loss after power loss
• Improved autotune for Antminer S19i
• Fixed chip detection issue on Antminer S19k Pro
• Resolved double pause issue
• Fixed dashboard hangs with a large number of connections
• Fixed voltage adjustment in immersion and manual cooling mode
• Fixed work with L7 sensors

API Changes:

• Added max_rpm parameter in the fans object on the /summary response
• Added hr_stock to the /summary response
• Introduced new /chains and /factory-info routes on the API

release 1.2.5 rc2

Added

• Add support of Antminer S21 Hydro
• Add preset 9250MH for Antminer L7
• Add new response 'factory-info' in API
• Add show chain factory info
• Ignore fans with extra large rpm readings
• Show chain temp after overheated
• Ignore invalid eeprom
• Save logs after reboot

Changed:

• Correct temp sensor position for Antminer S21/T21
• Correct profiles for Antminer S21/T21
• Correct presets for Antminer S19 Hydro/S19Pro Hydro
• Chip temperature recalculation for x21 series
• Remove 'asic_boost' from settings in API

Fixed:

• Fix for minimum hashrate check when quick start is enabled
• Fix cooling down for fan auto/manual mode
• Fix double compression in Safari

release 1.2.5-rc1

Added

• Add support for Antminer S21 (AMLogic)
• Add support for Antminer T21 (AMLogic/CVitek)
• Add support for the Antminer S19k Pro submodel (BHB56903-)
• Add new presets for S19 Hydro and S19 Pro Hydro
• Display serial numbers and stock hashrates miner on the side panel
• Implement heatmaps for Antminer S21/T21
• Include "max_rpm" fan parameter in the fans object on the summary response
• Introduce new 'chains' route on the API

Changed:

• AUpdate water temperature checks on Hydro miners
• Adjust preset switcher temperature differentials
• Improve autotuning functionality
• Enhance miner stability
• Make minor UI/UX adjustments

Fixed:

• Fix memory leaks and firmware hangs on CVitek
• Fix position sensor issues for T19
• Resolve configuration loss after power loss
• Correct profiles for Antminer S19i, S19 Hydro
• Improve autotune issues with S19i

release 1.2.5-beta1

Added

• Add support x21 series
• Add support submodel Antminer S19k Pro (BHB56903)
• Add support Antminer S19k Pro on Xilinx
• Add show chain serial number and hashrate on logs
• Add Performance widget: * When you first install firmware - the widget will be right on the dashboard. * For those who update the firmware, for the widget to appear you need to take it out of the list of widgets.

Changed:

• Correction of Antminer S19i profiles
• Minor changes

Fixed:

• Fixed detect chips on Antminer S19k Pro
• Fixed double pause when pausing through monitoring
• Fixed false positives of Microsoft antivirus (CVITEK)
• Fixed dashboard hangs with large number of connections

release 1.2.5-alpha5

Added

• Add support T19 hydro

Changed:

• Raised the critical temperature threshold to 120 C
• Required restart when disable boards from dashboard
• Support old format autotune.json without serial number(1.2.0)
• Leds blink faster when activate find miner

release 1.2.5-alpha4

Added

• Add stock hashrate to api request summary
• Support submodel S19k Pro(BHB56902-)
• Preheating chips
• Support miner's on CVitek
• Voltage adjustment on auto mode

Changed:

• Change chip temp offset on Hydro miners

Fixed:

• Fixed Display of red led when min fan count is configured and immersion mode
• Fixed voltage adjustment in immersion and manual mode
• Fixed work with L7 sensors

release 1.2.1

Added

• Implemented skeletal animation for a smoother loading experience on the main screen.
• Introduced a DevFee penalty warning within the hashrate widget for increased transparency.
• Incorporated a silent start and stop mode for the miner, providing a more seamless user experience.
• Added an option to automatically unpause the miner after a complete reboot, enhancing convenience.
• Implemented a feature to automatically lower presets in case of errors or overheating, optimizing miner performance.
• Displayed active pool ping for better monitoring and troubleshooting.
• Added support for the Farsi language, expanding language accessibility.
• Provided visibility of non-functioning coolers on the overview screen for improved diagnostics.
• Introduced automatic voltage adjustment based on temperature for better energy efficiency.
• Implemented adaptive temperature control, enabling auto-switching presets for optimal performance.
• Added the ability to change presets without restarting mining, enhancing flexibility.
• Included a descriptive error message for better understanding and troubleshooting.
• Added an option to limit the number of miner reboots during error occurrences, preventing excessive disruptions.
• Introduced downgraded presets specifically for S19 Pro, catering to different user preferences.
• Included additional presets for S19j Pro and S19 Plus, offering a wider range of options.
• Extended support for S19 XP Hydro and S19k Pro miners, keeping the software up-to-date with the latest hardware.
• Implemented a function to ignore non-working temperature sensors for improved reliability.
• Enhanced API functionality by processing the `devdetails` command on port 4028.

Changed:

• Revamped the mechanism for adding new widgets in the dashboard for a more intuitive experience.
• Improved settings recovery and backup block for enhanced data security.
• Enhanced the "Advanced" section withAdded

  descriptions of default values for better user understanding.

• Streamlined the interface by removing support for older miner models (17th series and T2T).
• Modernized the "Performance" section for improved user experience.
• Adjusted the model for working with adaptive design, ensuring a cohesive and responsive layout.
• Reduced auto-tuning operating time by up to 50%, optimizing efficiency. After comparing against our competitors this seems to bring us back to the lead yet again!
• Improved LED indications for better identification of miner issues.
• Strengthened the miner cooling function for more effective temperature management.
• Optimized stability and performance of the miner.
• Updated the interface and implemented UX improvements for a more polished look.
• Revolutionized autotune yet again! Redesigned it for "bottom-up tuning," minimizing peak power consumption during tuning.
• Enabled more options to be changed without restarting mining, providing greater flexibility.
• Updated the default password for the hotel pool to `x`.
• Adjusted chip temperature offset for S19, T19 (from 15C to 10C).
• Set a minimum starting temperature of 10C for hydro miners.
• Migrated to Vue 3 and updated all modules, utilizing a new project builder (Vite 5).
• Ability to reset all chain settings with one button click - Allow to use '_' in pool accounts and workers

Fixed:

• Resolved errors in the device firmware update dialog.
• Fixed the appearance of the pool widget when reducing its size.
• Corrected the display size of DevFee for better visibility.
• Fixed links and display issues in release descriptions.
• Improved worker name validation in the "Pools" section.
• Resolved the 404 page issue.
• Fixed the reset of widgets to default locations.
• Corrected the dialog for managing customized presets in mobile mode.
• Addressed auto-filling issues with pools.
• Fixed blinking problems when adding widgets.
• Made corrections in working with pools (stratum protocol).
• Fixed the restoration of the miner config.
• Addressed chip location issues for S19K Pro.
• Fixed sensor operation in S19 Pro Hydro, S19 Pro Plus Hydro.
• Resolved the placement function during miner initialization.
• Fixed the problem of increased consumption after pausing.
• Corrected the function of pausing the miner when there is no active pool.

release 1.2.0-rc4

Added

• NEW AUTOTUNING - automatic tuning of all chips
• Remote firmware installation on A113D (amlogic) control boards from micro USB
• Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND
• Support for miners Antminer S19J+;
• Support for miners Antminer S19L
• Limit on the number of miner reboots in case of problems
• Presets (set of automatic settings) for S19a Pro;

Changed:

• Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro
• API speed optimization;

Fixed:

• Working with Nicehash
• Errors that led to the fall of the miner (error code: 11
• An error that caused the miner to freeze
• Improvements in the interface

release 1.1.12

Added

• Support for miners S19 (88), S19j Pro A, S19 XP
• Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings.
• MAC addresses viewable from the dashboard.
• The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards.
• Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit)
• Widgets are responsive now! 4k? 1080p? 480p? It all looks B-E-A-U-T-I-F-U-L!!!!
• Voltage compensation based on the temperature and performance of the miner.
• Voltage checking happens before detecting the chips on the boards. (Important for diagnostics if PSU issue or chip issue)
• EEPROM support for new miner models (Yes even those weird ones) - Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON 😉
• General firmware optimization and stability changesAdded

  prior to auto-tune release (That’s next)

Changed:

• Work with network settings (DHCP → Static) - Pool Widget - Board Widget - Fonts and their adaptability
• Expanded optimized interface mode - Location of alerts
• Display firmware version Location (Bottom right)

Fixed:

• Fixed an issue that could occur while changing operation of pools by API
• Operation of Reset/IP Report Buttons for AML Control Boards.
• Incorrect baud rate setting for 136x chips
• Inability to generate a diagnostic report
• Operating mode of the device without hashboards connected to it
• Firmware error on some BB models
• Issues with graph ranges not always returning to true value fixed.

release 1.1.11

Added

• Option to disable interface animations (useful when using AnyDesk or Teamviewer)
• Quick" settings panel - More convenient configuration of boards, domains, and chips
• Support for new power supply models - Support for various hashboard modifications
• Console Debug Mode - for administrators only
• Support for Antminer S19+
• Support for Antminer S19i
• Support for Antminer S19 (with 88 chips)
• Support for Antminer S19 Pro A
• Support for Antminer S19j Pro A
• General firmware optimization

Changed:

• Improved support for mobile devices
• Enhanced temperature sensor and chip polling
• Pause/resume function support extended to all firmware series

Fixed:

• Fixed interface issues when accessed via
• Fixed errors leading to share rejections and decreased hashrate on the pool
• Fixed errors leading to miner restarts - Other bug fixes..